您的位置： 首页 >> Product >> Purification Equipment Division >> Compressed air purification >> Adsorption dryer

SMA180 Micro-heat regeneration type dryer

● Large size tower body,Ensure air flow rate and contact time

● High performance adsorbent with stable performance andlong service life

● Large displacement silencer

● High temperature protection,pressure switch detectionprotection,low density heater

● Stainless steel one-way valve,throttle orifice plate,Airflowdisperser

● High temperature butterfly valve

● High flow PLC control

在线咨询

全国热线

Manager Shen 13816445768

产品展示 / display

The micro heat regeneration adsorption dryer is an energy-saving product designed and developed by our compa-ny.It has the advantages of thermal regeneration and non-thermal regeneration.The recycled gas is in the form ofmicro-heating,so as to reduce the consumption of recycled gas and keep the energy saving.It avoids the shortswitching time of the heat-free regenerative dryer and save the electrical energy of the heat-absorbing dryer.It is anenergy-saving adsorption dryer with the current economy in the purification industry.and it is to be widely used inmetallurgy,power,electronics,food,chemical industry,petroleum,medicine,tobacco,instrumentation,instrumen-tation and automatic control industries.

热品推荐 / Hot product

: SMA180 Micro-heat regeneration type dryer

The micro heat regeneration adsorption dryer is an energy-saving product designed and developed by our compa-ny.It has the advantages of thermal regeneration and non-thermal regeneration.The recycled gas is in the form ofmicro-heating,so as to reduce the consumption of recycled gas and keep the ener

: SMBZ180 Blower Zero Gas Consumption Dryer

Adsorption drying process:Compressed air containing water flows through an adsorption tower equipped withhigh-performance adsorbent,and the water in the compressed air is absorbed and dried by the adsorbent and flowsto the gas terminal for use of the gas supplying.Regenerative heating process:This s

: SMB180 Blower Pruge Regenerative Desiccant Air Dryer

Adsorption drying process:The compressed air contain-ing water flows through an adsorption tower equippedwith high-performance adsorbent,the water in thecompressed air is absorbed and dried by the adsorbentthen flows to the gas terminal for use at the gas usingdevice.Regeneration process:This series

: SMC180 Heatless Adsorption Drver

The heatless adsorption dryer uses "pressureswing adsorption"to achieve the dry effect.Asthe moisture content in air is directly proportion-al to the pressure,a part of the dried air (calledregenerated gas)is depressurized and expandedto atmospheric pressure.This pressure changemakes the e